When parameter values have changed, the Store LED lights indicating the preset has been modified and needs to be stored (see page 17 for more on the storing procedure).In no event shall DigiTech or its dealers be liable for special or conse- quential damages or from any delay in the performance of this warranty due to causes beyond their control.It is your safeguard in the unlikely event that the GNX3 develops a problem.
Apply Power 1.Turn the OUTPUT level knob, on the rear panel of the GNX3, all the way down (fully counter clockwise). Connect the PSS3 power supply to the POWER jack on the GNX3. Bypass,Tuner, Learn-A-Lick, and Mode functions are accessed by pressing the labeled pair of footswitches. DRUMS - This button accesses the GNX3s Drum Machine Functions. The bottom row of Mode buttons are used in conjunction with the Data Wheel to select and edit the Pattern, Tempo, and Level. Most GNX3 parameters can be assigned to the Expression Pedal. Applying extra pressure to the toe of the Expression Pedal switches. The output signal is in a stereo digital format, and is intended to be connected to a digital SPDIF input found on other SPDIF compatible devices and sound cards. NOTE: Do not connect the SPDIF output to analog auxiliary, CD, phono, or tape inputs on consumer electronic devices. Applying Power Once the audio connections are made, turn the GNX3s Output Level, on the rear panel, all the way down (counterclockwise). Connect the PSS3 to the power jack, on the back of the GNX3, and the other end to an AC outlet. The Factory LED lights indicating a Factory preset is active. The GNX3s Modes When you first apply power to the GNX3, it powers up in one of three modes: Bank, Stompbox, or Recorder. Tuner The Tuner in the GNX3 lets you quickly tune or check the tuning on your guitar. The tape, CD, or MP3 players signal is output through the GNX3s left, right, and headphone outputs. Press the Drums button.The Drums buttons LED lights and the current drum pattern begins playing. If the Drums button is pushed, the Store, Utility, and Amp Save LEDs light. Press the Store, Utility, or Amp Save buttons to adjust the Pattern,Tempo, or Level using the DATA WHEEL. The Green and Red Amp Channels include individually selectable Amp Models, Cabinet Types, Gain, EQ, and Level settings.The Speaker Cabinets resonant frequency can be selected. After models are selected for the Green and Red channels, the models can be Warped together to create a HyperModel. Selecting AmpCabinet Models The first step to editing an Amp Model, Cabinet Type, or creating your own HyperModel is to select the Amp and Cabinet types for the Green and Red Amp channels in your preset. The Effects section is accessed with the Effect Select UpDown buttons.The Matrix LEDs light one at a time to identify the selected row of effects.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |